Questions? Feedback? powered by Olark live chat software

Fx3 Protect Mask powered by Acteev Protect™ Antimicrobial Technology

# TPG011
Made in
USA
Fx3 Protect Mask powered by Acteev Protect™ Antimicrobial Technology

Learn more about the science behind Acteev™ Technology on Acteev.com

The best just got better with the reusable and washable Fx3 Protect Mask with Acteev™ Technology*. Other masks try to stop microbes, but the germs still collect on the mask’s surface. Acteev Protect masks are designed with microbe-fighting zinc ion technology built-in to the fabric to destroy germs from the inside out while providing unmatched fit, fabric, and function delivered only by the Fx3 Protect Series. The Fx3 Protect Mask has 3 layers to defend against microbes and other pollutants -- 100% Polyester Active Weave exterior, patent-pending Acteev Protect™ Antimicrobial Technology inside layer, and an added third layer -- a replaceable PM2.5 filter for maximum efficiency. Constructed with the utmost attention to detail, this mask includes tension-free ear straps, easy-slide adjustable ear buckles, a built-in nose bridge, and a dual-sided opening filter pocket for easy filter insertion. Available in S/M and L/XL.

Features and Benefits

  • 3-Layer efficiency: 100% Polyester Active Weave exterior, Acteev Protect™ Antimicrobial Technology* interior, and included 1x PM2.5 replaceable filter reduces the risk of breathing in small particles in the air** (additional 10 pack replaceable filters available. Click Here to learn more)
  • The CDC recommends wearing masks in the fight against COVID. Acteev Protect masks are designed with microbe-fighting zinc ion technology embedded in the fabric to DESTROY GERMS from the inside out. 
  • Filter pocket offers dual-side openings for ease of filter insertion
  • Tension-Free Ear Loops for all-day comfort
  • Easy-slide Adjustable Ear Straps -- 8” standard easy-slide adjustable ear straps offer easy and convenient adjustment 
  • Built-in adjustable nose bridge for a contoured fit ensuring droplets don’t travel in or out
  • Stays in place, limiting needed adjustment with unsanitized/ washed hands
  • Comfortable and breathable design ideal for prolonged wear
  • Made in the USA

*Acteev Protect does not protect users or others against disease-causing bacteria.  These claims fall under the U.S. Environmental Protection Agency’s treated article exemption.  Regulations in other countries may differ.  This product is not a medical device or sterile.

**Toddy Gear makes no guarantees or warranties, express or implied, that the mask prevents infection or the transmission of viruses or diseases. The product has not been FDA approved. For non-medical use ONLY. 

Acteev Protect is a registered trademark of Ascend Performance Materials.

Product Color:

Pricing

Quantity 50+ 100+ 250+ 500+ 1000+
Price (C) $ 12.35 $ 11.61 $ 11.02 $ 10.47 $ 9.95

Select Actions

Specifications

Price Code
C
Product Size
S/M: 7.22"x5.70" (WxH)
L/XL: 8.125"x6.25" (WxH)
Imprint Size
S/M: 7.50"x6.07" (WxH)
L/XL: 8.40"x6.60" (WxH)
Safe Area
S/M: 5.96"x4.29" (WxH)
L/XL: 6.98"x4.75" (WxH)
Imprint Method
Dye Sublimation
Imprint Location
front
Imprint Color
Full-color
Setup
$80.00(V)
Repeat Setup
$40.00(V)
Preproduction Sample
$125.00(V)
Packaging
Individual Polybag
Material
Outside: 100% Polyester, 170gsm
Inside: Active Protect - Antimicrobial Technology* by Ascend Performance Materials
Hem: Cotton/Spandex
How Many Layers?
3 (including filter)
Filter Pocket
Yes
Filter Included & How Many?
1, 10-pack upgrade available, Click Here to learn more
Earstrap Length
8"
Made in
USA
Production Time
Up to 10 business days from proof approval.

Estimate Freight

For international shipments please call for shipping quote.

Download Images

Ordering Information

Ordering

All information, artwork, and materials required for production must be received with the purchase order. Incomplete orders will be delayed. Instructions received on previous orders will not be considered unless restated on current order. Toddy Gear is not responsible for errors as a result of handwritten purchase orders or art copy/content. Orders or art changes will NOT be accepted via phone for new or repeat orders. All orders and/ or changes must be confirmed in writing.

Placing an Order

Purchase orders can be sent to orders@toddypromo.com or faxed to (312) 765-7548. Art must be emailed to art@toddypromo.com.

Order Confirmation

All orders are confirmed via email to the email address listed on the purchase order. If receipt of your order has not been confirmed within 48 business hours after submission, it has not been received.

Reorders

Exact reorders and repeat orders with changes require the following for production: previous purchase order number, approved proof from original product if available, and required PMS colors. Reorder setup fee applies. Setup fee for reorders is Ω of the standard product setup fee. If any changes are needed from the original order, it is not an exact reorder, and the full setup fee will be charged.

Note:

Slight variation may occur between the original run and the reorder run of the product and will be considered acceptable. Toddy Gear is not responsible if order is produced incorrectly due to inaccurate or insufficient information on the purchase order.

Rush Orders

Any orders that are required in less than the standard published lead-time are subject to rush charges. All order elements must be received and confirmed by Toddy Gear before noon (CST). These elements include a purchase order marked "Rush Service", payment details, and approved proof. If received after 12:00 pm (CST), processing will start the following day. Email approved proof/ art approval to art@toddypromo. com. Please call for rush availability and approval prior to ordering. Toddy Gear is not responsible for delays brought on by incomplete purchase orders, inaccurate information on purchase orders, or inaccurate payment details.

Cancellations 

Order cancellations MUST be received in writing and acknowledged prior to production of the order. Toddy Gear will not be held responsible if no attempt is made to ensure cancellation request was received. There will not be a cancellation charge if the cancellation is received prior to the order moving into production. If the order is canceled after the order has moved into production, Toddy Gear reserves the right to charge the setup fee for the specific product and any production costs incurred including materials, labor, and any other order expenses already incurred. No cancellation will be accepted for completed orders.

Returns 

Toddy Gear prides itself on premium product quality and customer satisfaction. If a customer is not satisfied with a Toddy Gear product, we will strive to resolve the issue. No merchandise may be returned without a return authorization (RA) number, and all boxes must be marked with a return authorization number. All potential custom product returns must be submitted for evaluation to Toddy Gear within 15 calendar days of receipt of the product. Products will not be accepted without written consent of Toddy Gear. To request an RA# contact your Toddy Gear sales representative. Toddy Gear reserves the right to request a product sample and offer to resolve the issue prior to authorizing a return. Unauthorized returns will not be accepted and will be returned to sender.

Art Guidelines

Toddy Gear Developed Artwork

Customer must provide all logos and/ or artwork that is directed for inclusion in the design. All logos and/or artwork must be provided in vector format with all text outlined. Accepted files are: AI, EPS, PDF. All placed images MUST be at least 300dpi. Toddy Gear cannot guarantee PMS color matching but can reference up to three (3) PMS colors per design. These colors must be provided with the artwork. Graphic design services available for mailer card development or design recreation. Design services are billed at $60.00(V) per hour.

Customer Provided "Print Ready" Artwork

Customer must submit print ready artwork in vector format. Accepted file types are AI, EPS, PDF. All placed images MUST be at least 300dpi. All text must be outlined. Up to three PMS colors can be specified. All customer submitted artwork must be sized at 100%. Toddy Gear reserves the right to determine what is acceptable artwork and may make adjustments/ modifications to optimize print quality. Customer will be notified if their artwork requires modification for best output. For best results, font size should be at least 12 points.